Filtration Accessories
Housings, fittings, taps and connectors for undersink, benchtop and whole-house filters.
-
Filter Housings
-
Filter Housing AccessoriesHousing spanners, replacement O-rings and food-grade O-ring lube.
-
Under-sink Accessories
-
Benchtop AccessoriesTap adapters and diverter valves to connect a benchtop filter.
-
Quick Fit ConnectorsDMfit push-fit connectors and tubing for leak-free filter connections.
-
Fittings
-
TapsFilter taps for the kitchen sink, including lead-free stainless steel options.
How to choose
- Housing leaking or hard to open? Start with a new O-ring and the right housing spanner for your brand.
- Setting up an under-sink filter? You'll usually need a take-off valve, tubing and a filter tap.
- For a benchtop filter, check your tap type. You may need an adapter or diverter valve.
- Check sizes carefully. Tube sizes like 1/4" must match your connectors, and threaded fittings need the right BSP size.
Common questions
Why is my filter housing leaking?
The most common cause is a worn or dry O-ring. Replace it and use a little food-grade O-ring lube.
Do I need a special spanner?
Yes. Housings are opened with a spanner made for that brand and size, which saves damaging the housing.
What's a take-off valve?
A fitting that takes water from your cold pipe to feed an under-sink filter.
Are your filter taps lead-free?
Many are. Look for lead-free or 304 stainless steel on the product page.
Still not sure which one you need?
Answer a few quick questions, or email us a photo of your old cartridge and we'll point you to the right one.