10" StandardAqualine
Aqualine DI2 De-ionising Mixed Bed Resin Cartridge (10" x 2.5")
When the resin is spent How long it lasts depends on the TDS of the water going in. It can't be regenerated.
Our promise: if it's not right, we'll put it right.
Need a hand matching a filter?
Email us a photo of your old cartridge and we’ll check this one fits.
- NZ owned & operated
- Most orders dispatched same or next day
- Click & collect from Te Rapa, Hamilton
- Brand
- Aqualine
- Size
- 10" Standard
- Type
- Specialty Cartridges
- SKU
- DI2
- Stock
- In stock
What it removes
What it removes
Aqualine DI-2 mixed bed de-ionising cartridge.
-
Dissolved solids
Mixed bed ion exchange resin takes out dissolved ions, for very low TDS water.
Fits
Systems it fits
Fits any 10" Standard housing: about 10" long and 2.5" wide. Check the size on your old cartridge.
Specs
Specs
- Model
- Aqualine DI-2 (code DI2)
- Size
- 10" Standard (10" x 2.5")
- Media
- Mixed bed ion exchange resin, semiconductor grade (low TOC)
- Pre-filter
- 100 micron reticulated poly foam
- Post-filter
- 20 micron spun-bonded polypropylene
- Flow rate
- About 1 L/min (0.25 US gpm)
- Capacity
- About 28,400 ppm-litres (7,500 ppm-gallons)
- pH range
- 0–14
- Regenerable
- No
What's in the box
- 1 x Aqualine DI-2 de-ionising cartridge
When to change
Change it on time
When the resin is spent
How long it lasts depends on the TDS of the water going in. It can't be regenerated.
Common questions
How long will it last?
Divide 28,400 by the TDS of the water going in (in ppm) for a rough number of litres. For example, RO water at 10 ppm gives about 2,800 litres. Aqualine's figure is lab tested on 10 ppm water.
Can I regenerate it?
No. It's a non-regenerable cartridge, so replace it when it's spent.
Will it fit my housing?
Fits any 10" Standard housing: about 10" long and 2.5" wide. Check the size on your old cartridge.
Full product details
Read the full description
The Aqualine DI-2 is a de-ionising cartridge for 10" Standard housings, about 2.5" wide, filled with mixed bed ion exchange resin. It takes dissolved ions out of the water, so it's for jobs that need de-ionised water, such as polishing RO water or lab use.
Aqualine makes it as a polisher for low-TDS water, with a foam pre-filter and a spun polypropylene post-filter built in. It's rated at about 1 L/min. How long it lasts depends on the TDS of the water going in: divide 28,400 by the TDS in ppm to get roughly how many litres it'll treat. It can't be regenerated, so replace it when it's spent. We recommend feeding it RO water or other low-TDS water, as harder water uses it up much faster.
Not sure it's the right size? Email us a photo of your old cartridge. We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.