You're viewingK2567: KDF 55 + carbonOmnipure K2567 10" x 2" KDF and Carbon Inline Filter
NSF/ANSI 42 certified, made in the USA. 1.9 L/min. Change every 12 months or 5,678 litres.
$71.00
Omnipure
Omnipure K2567 10" x 2" KDF and Carbon Inline Filter
$71.00incl. GST
12 months or 5,678 litres, whichever comes first Replace it sooner if the flow noticeably slows.
Subscribe and save up to 15%. Pick a plan below.
Our promise: if it's not right, we'll put it right.
Need a hand matching a filter?
Email us a photo of your old cartridge and we’ll check this one fits.
- NZ owned & operated
- Most orders dispatched same or next day
- Click & collect from Te Rapa, Hamilton
- Brand
- Omnipure
- Type
- Inline & Quick Connect Cartridges
- SKU
- K2567JJ
- Stock
- In stock
What it removes
What it reduces
KDF 55 and granulated activated carbon (GAC) in one 2" inline cartridge.
-
Chlorine
Tested to more than 95% chlorine reduction.
-
Taste and odour
The carbon traps the compounds that make water taste and smell off.
-
Scale and particulates
KDF 55 helps control scale. Also reduces particulates, dissolved colour and turbidity.
Compare
Omnipure inline cartridges
Both combine KDF and carbon, are for mains water only, and come with JJ push-fit or BB threaded ends.
You're viewing
OKDF30/1 (K5567): KDF + carbonOmnipure OKDF30/1 KDF and Carbon Inline Replacement Filter1.9 L/min. Change every 12 months or 7,570 litres.
$80.00
Specs
Specs
- Model
- K2567 (JJ or BB)
- Media
- KDF 55 + granulated activated carbon (GAC)
- Diameter
- 2"
- Connection
- JJ: ¼" John Guest push-fit. BB: ¼" BSP female threaded ends
- Flow rate
- 1.9 L/min (0.5 gpm)
- Capacity
- 5,678 litres (1,500 gallons)
- Maximum pressure
- 862 kPa (125 psi)
- Water temperature
- 2–38°C
- Certification
- NSF/ANSI 42
- Made in
- USA
- Water source
- Mains (town supply) only
- Change every
- 12 months or 5,678 litres, whichever comes first
What's in the box
- 1 x Omnipure K2567 inline cartridge (JJ or BB, as chosen)
When to change
Change it on time
12 months or 5,678 litres, whichever comes first
Replace it sooner if the flow noticeably slows.
Common questions
Which fitting type should I choose?
If your system uses ¼" push-fit tubing, choose JJ. If it connects with male threaded fittings, choose BB. If you're unsure, get in touch and we'll confirm the right type before you order.
How often do I need to replace it?
Every 12 months or 5,678 litres, whichever comes first. Replace it sooner if the flow noticeably slows.
What does NSF/ANSI Standard 42 mean?
NSF/ANSI 42 is an independent certification for reducing aesthetic contaminants, mainly chlorine, taste and odour. The filter has been independently tested to that standard.
Can I use it with rainwater, tank or bore water?
No. The K2567 is for mains (town) water only. Don't use it with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Full product details
Read the full description
A 10" x 2" inline filter with KDF-55 and granular activated carbon, for an underbench line, fridge or drinking tap on town water. It reduces chlorine, taste and odour.
Which one? Pick K2567JJ for 1/4" quick connect tube, or K2567BB for threaded ends. It's rated at about 5,680 litres at 1.9 L/min. Change it at 5,680 litres or once a year, whichever comes first, or sooner if the flow slows.
Not sure it's the right size? Email us a photo of your old cartridge. We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.
You might also need
