Pentair
Pentair PRF-RO Tankless Reverse Osmosis System
Our promise: if it's not right, we'll put it right.
Need a hand picking the right system?
Email us a photo of your current setup or water source and we’ll point you to the right system.
- NZ owned & operated
- Most orders dispatched same or next day
- Click & collect from Te Rapa, Hamilton
- Brand
- Pentair
- Type
- Reverse Osmosis
- SKU
- PRF-RO
How it works
Four stages
Water goes through a carbon pre-filter, two RO membranes and a carbon post-filter on the way to the tap.
- Cold water in
Stage 1
Carbon pre-filter
Traps larger particles and chlorine.
Stage 2
Two high-flow RO membranes
Reduce dissolved solids.
Stage 3
Carbon post-filter
Polishes the taste.
- Filtered water at the drinking tap
Tap and fittings
What comes with it
-
Drinking tap
IncludedLong-reach tap with air gap.
-
Storage tank
Not includedNot needed. It's tankless.
-
Filters and membranes
IncludedCarbon pre-filter, two RO membranes and carbon post-filter, fitted.
Specs
Specs and what's in the box
- Model
- PRF-RO
- Flow
- About 1.8–2.8 L/min, depending on pressure
- Operating pressure
- 40–80 psi (2.76–5.52 bar)
- Size
- 430 mm high × 510 mm wide × 240 mm deep
- Connections
- ½" BSP inlet, ⅜" tube outlet
- Water temperature
- 4.4–37.8 °C
- Certification
- NSF/ANSI 58
- Filter changes
- Pre/post filters 6–12 months, membranes 2–4 years
What's in the box
- PRF-RO manifold
- Carbon pre-filter (fitted)
- 2 × high-flow RO membranes (fitted)
- Carbon post-filter (fitted)
- Long-reach tap with air gap
- Tubing set
- Installation fittings and tap adaptor
Common questions
Does it need power or a pump?
No. It runs on mains pressure between 40 and 80 psi.
How often do the filters need changing?
Pre- and post-filters every 6 to 12 months, membranes every 2 to 4 years.
Still not sure?
Tell us about your home and water supply and we'll point you to the right system.
Full product details
Read the full description
A tankless reverse osmosis system that makes filtered water on demand, so there's no storage tank to wait on or find room for. It runs on mains pressure with no pump or power.
Water goes through a carbon pre-filter, two high-flow RO membranes and a carbon post-filter. Flow is about 1.8 to 2.8 litres a minute depending on your pressure, which needs to be 40 to 80 psi.
It comes with the filters and membranes fitted, a long-reach tap with air gap, tubing and installation fittings. Change the pre- and post-filters every 6 to 12 months and the membranes every 2 to 4 years.
We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.