PureValue RO-4EZ50 Replacement Filter & Membrane Kit: Easywell 10PX05 5 micron sediment pre-filter, MATRIKX CTO/GR 5 micron carbon block pre-filter, Omnipure K2533 JJ GAC inline polishing post-filter (JJ push-fit) and Hydramem HM1812-LPE RO membrane

PureValue

PureValue RO-4EZ50 Replacement Filter & Membrane Kit

Fits these systems

  • PureValue RO-4EZ50 Underbench RO System
$302.45incl. GST

Change the pre-filters and polishing filter every 6–12 months This kit includes a new membrane for a full service.

Our promise: if it's not right, we'll put it right.

Need a hand matching a filter?

Email us a photo of your old cartridge and we’ll check this one fits.

Mon–Fri, 8am–4pmsales@filtrationstation.co.nz

Brand
PureValue
Type
Replacement Filter Kits
SKU
10PX05 + CTO/GR + K2533-JJ + HM1812-LPE

In the kit

What's in the kit

Everything you need for one service, in one box.

PureValue

Fits

Systems it fits

The two pre-filters fit 10" Standard housings: about 10" long and 2.5" wide. The polishing filter is the K2533 JJ inline cartridge with built-in push-fit fittings and the membrane fits the RO membrane housing. Check your old parts first.

Fits these systems

  • PureValue RO-4EZ50 Underbench RO System

When to change

Change it on time

Change the pre-filters and polishing filter every 6–12 months

This kit includes a new membrane for a full service.

Common questions

How often should I change them?

Change the pre-filters and polishing filter every 6–12 months, or sooner if the flow drops. Change the membrane when the output drops or the taste changes.

Will this fit my system?

It's made for the PureValue RO-4EZ50 Underbench RO System. The two pre-filters fit 10" Standard housings: about 10" long and 2.5" wide. The polishing filter is the K2533 JJ inline cartridge with built-in push-fit fittings and the membrane fits the RO membrane housing. Check your old parts first.

Full product details

Read the full description

Due to service your PureValue RO-4EZ50 underbench RO system? This kit has all four: two pre-filters, the carbon polishing filter and a new RO membrane.

Easywell 10PX05 (5 micron polyspun) catches sediment first, then the MATRIKX CTO/GR (5 micron carbon block) reduces chlorine to protect the membrane. The Hydramem HM1812-LPE low pressure membrane does the reverse osmosis, and the Omnipure K2533 JJ (GAC inline, built-in push-fit fittings) polishes the water before the drinking tap.

Will it fit? This kit is made for the PureValue RO-4EZ50 Underbench RO System. The two pre-filters fit 10" Standard housings, about 10" × 2.5". Check your old cartridges first.

How often? Change the pre-filters and polishing filter every 6–12 months. The membrane usually lasts longer, so this kit suits a full service when the output drops or the taste changes.

We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.