Pentair
Pentair USD10-AAL Twin Undersink Fluoride Filter Kit
$479.55incl. GST
Our promise: if it's not right, we'll put it right.
Need a hand picking the right system?
Email us a photo of your current setup or water source and we’ll point you to the right system.
- NZ owned & operated
- Most orders dispatched same or next day
- Click & collect from Te Rapa, Hamilton
- Brand
- Pentair
- Type
- Town Water Under-sink Filters
- SKU
- USD10-AAL
What it removes
What it reduces
-
Fluoride
The AAL activated alumina cartridge reduces fluoride. It works best at a slow flow.
-
Chlorine, taste and odour
The CBC10 carbon block reduces chlorine taste and odour.
-
Fine sediment
The CBC10 filters to 0.5 micron (nominal).
-
Cysts
The CBC10 is tested to 99.95% reduction of Giardia and Cryptosporidium cysts.
How it works
How it works
- Water in
Stage 2
CBC10 carbon block
0.5 micron (nominal) carbon block for chlorine taste and odour and fine sediment.
- Filtered water at the tap
Tap and fittings
What comes with it
-
Filter tap
IncludedChoose the TAPD Designer Tap or PLAT-S Platinum single lever.
-
Housings and cartridges
IncludedTwin 10" Standard housings with both cartridges.
-
Take-off valve
IncludedChoose the one that suits your pipe.
-
Pressure reducing valve
Not includedNot included.
Fit check
Is it right for my kitchen?
A quick check before you buy.
-
Town water
Good fitMade for reducing fluoride in town water at a drinking tap.
-
Tank water
Good fitPair it with filters plus UV if you drink your tank water.
Running costs
What it costs to run
$156.40for 2 individual cartridges, incl. GST
Specs
Specs and what's in the box
- Model
- USD10-AAL
- Housings
- Twin 10" Standard undersink
- Stage 1
- AAL activated alumina fluoride cartridge (10" × 2.5")
- Stage 2
- Pentek CBC10 carbon block, 0.5 micron (nominal)
- Tap
- Your choice: TAPD Designer Tap or PLAT-S Platinum single lever
- Take-off valve
- Your choice: SV3, SV6 (G), SV5 Plumbers Delight, DWTOBV3/4 or DWTO3/4
- Pressure reducing valve
- Not included
What's in the box
- 1 × twin 10" Standard undersink housing set
- 1 × AAL activated alumina fluoride cartridge (fitted)
- 1 × Pentek CBC10 carbon block cartridge (fitted)
- 1 × filter tap (the one you choose)
- 1 × take-off valve (the one you choose)
Common questions
How often do I change the cartridges?
Change the AAL every 6 months and the CBC10 every 6–12 months. Change them sooner if the flow drops. How long the AAL lasts depends on how much fluoride is in your water.
Which take-off valve do I need?
SV3 is a parallel saddle valve for metal pipe. SV6 (G) is a G-clamp saddle valve for polybutylene pipe. SV5 is a Plumbers Delight take-off valve (1/2" BSP). DWTOBV3/4 is a dishwasher take-off tee. Not sure which suits your pipe? Email us a photo and we'll help you pick.
Is a pressure reducing valve included?
No, a pressure reducing valve is not included.
Which tap should I pick?
The TAPD Designer Tap is a chrome high-arch tap with a 10" reach. The PLAT-S is a chrome high-reach single lever tap.
Still not sure?
Tell us about your home and water supply and we'll point you to the right system.
Full product details
Read the full description
A twin undersink filter kit for a dedicated drinking water tap, set up to reduce fluoride. Two 10" Standard housings sit under your sink and feed filtered water to its own tap.
Stage 1 is an AAL activated alumina cartridge that grabs fluoride as water passes slowly through it. Stage 2 is a Pentek CBC10 0.5 micron carbon block that reduces chlorine taste and odour and traps fine sediment. Change the AAL every 6 months and the CBC10 every 6–12 months, or sooner if the flow drops.
Choose your tap (TAPD Designer Tap or PLAT-S Platinum single lever) and the take-off valve that suits your pipe. A pressure reducing valve is not included. If you drink your tank water, pair it with filters plus UV.
We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.
You might also need