Davey
Davey DCS150 Submersible Dewatering Pump – 1.5kW, 2in Outlet
Our promise: if it's not right, we'll put it right.
Need a hand choosing a pump?
Email us a photo of your current pump or setup and we’ll help you find the right one.
- NZ owned & operated
- Most orders dispatched same or next day
- Click & collect from Te Rapa, Hamilton
- Brand
- Davey
- Type
- Drainage & Flood Pumps
- SKU
- DCS150
- Stock
- In stock
Fit check
Is it right for my water supply?
A quick check before you buy.
-
Floodwater, cellars and garages
Good fitThese double case pumps suit cellars, garage floodwater, sump emptying and dirty water.
-
Shallow pits, partly submerged
Good fitThe double case lets water flow around the motor so it stays cool when it's not fully submerged.
-
Grey water or septic effluent water
Good fitSewage or grey water of neutral pH with up to 10% small soft solids under 10 mm, including septic effluent water disposal.
-
Raw sewage, sanitary products or stringy waste
Not this oneWe recommend Davey cutter and grinder pumps for stringy materials and raw sewage with sanitary products.
-
Float or manual
ConsiderThe DCS150 is listed without a float switch. Use an external float or level switch for automatic operation.
-
Emptying a swimming pool
ConsiderEmptying pools is another use. They're not for recirculating or filtering pools or spas, and never with people in the water.
Specs
Specs
- Model
- DCS150
- Pump type
- Double case submersible dirty water pump, centrifugal
- Motor output
- 1.5 kW
- Flow and head
- See the performance curve (not stated as single figures)
- Partial submersion
- Yes, double case design
- Suitable fluids
- Sewage or grey water of neutral pH, up to 10% small soft solids under 10 mm
- Power supply
- 220–240 V, 50 Hz, single phase
- Current
- 13 A full load, 48 A locked rotor
- Speed
- 2 pole, 2,850 rpm, CSIR start
- Power lead
- 10 m HO7RN-F, 3-pin plug
- Outlet
- 2" F BSP, hose tail provided
- Float
- None listed; use an external float/level switch
- Protection
- Thermal overload, IPX8, Class F insulation
- Seals
- Double mechanical seal in oil bath (silicon carbide/ceramic), sand slinger
- Materials
- 304 stainless steel outer case and strainer; cast iron impeller
- Weight
- 26 kg
- Warranty
- 12 months
Compare
Compare the Davey DC and DCS double case pumps
Figures for each model.
-
$496.80 from
Motor 0.1 kWDetails 1" outlet · auto float or manual -
$1,391.50 from
Motor 0.4 kWDetails 2" outlet · auto float or manual -
$1,943.50 from
Motor 0.55 kWDetails 2" outlet · auto float or manual -
$2,347.15 from
Motor 0.75 kWDetails 2" outlet · auto float or manual -
You're viewing
Davey DCS150
$3,653.55
Motor 1.5 kWDetails 2" outletYou're viewing
Common questions
Does it have a float switch?
The DCS150 has no float switch. Switch it off by hand, or with an external float or level switch, before the water drops below the pump.
What's a double case pump?
Davey's double case design lets water flow all around the motor, so it stays cool and can run when it's only partly submerged, which suits shallow pits.
What water can it pump?
Sewage or grey water of neutral pH with up to 10% small soft solids under 10 mm. For raw sewage with sanitary products or stringy waste, we recommend Davey cutter or grinder pumps.
How much water can it move?
Flow and head are given as a performance curve rather than single figures. Ask us and we'll read the curve for your lift and pipe run.
What warranty does it have?
The DCS150 comes with a 12-month warranty.
Still not sure?
Tell us about your home and water supply and we'll point you to the right pump.
Full product details
Read the full description
Davey's double case pumps are made to stay cool when they're not fully submerged: water flows right around the motor, so the DCS150 can run partly submerged in shallow pits. They suit dirty water, sump emptying, septic effluent water disposal and small soft solids, as well as cellars, garage floodwater and emptying pools. The outer case and strainer are 304 stainless steel, with a double mechanical seal in an oil bath and a sand slinger. The DCS150 is listed without a float switch, so pair it with an external float or level switch for automatic use.
The DCS150 is rated at 1.5 kW on 220–240 V single phase, with a 2" F BSP outlet, a hose tail and a 10 m HO7RN-F lead with a 3-pin plug. It handles sewage or grey water of neutral pH with up to 10% small soft solids under 10 mm, and weighs 26 kg. Flow and head are given as a curve, and there's no submergence figure for this model.
The DCS150 comes with a 12-month warranty. For raw sewage with sanitary products or stringy waste, we recommend Davey cutter or grinder pumps instead.
Need something smaller? See the Davey DCS75A / DCS75M.
We're NZ owned in Te Rapa, Hamilton. If it's not right, we'll put it right.